Septar Board Kit (Limited Beta Edition) – Now Available


The “Septar” board functions as a break out box for polyphonic audio pick-up systems for electric guitar (including those designed solely for MIDI application) to allow audio for each string. The following prototype has been developed with a newly designed circuit to improve audio output, specifically for piezoelectric based Graphtech Ghost Modular  and RMC pick-ups, but also functions with the magnetic based Roland GK-3 pick-up system.

Audio break out kits are available for users with Graphtech Ghost Modular, RMC, and Roland GK-3 pick-ups.



We only accept paypal at this time

Kit Specification



The kits include the following parts;

x 2 – Septar Boards (Drilled)

x 1 – 13 Pin DIN socket (Female)

x 14 – 2m2 Resistor 1 %

x 7 – 82pF Capacitor

x 7 – 6.35mm 3 Pole Jack Sockets

x 7 – Rz 560 ohm 1%

x 7 – 10K Resistor 5%

x 7 – 3K Resistor 5%

x 7 – J201 N Channel JFet

x 7 – 1uf Polyester Capacitor 5mm

x 1 – PP3 Battery Drawer 



The kits provide a balanced audio output. Housing and 1mm solid core wire must be sourced independently. Housing may be sourced on eBay or Maplin (UK).

Further discussion on beta testing: (Andy Butler) (Enda Bates) (Roland GK-3 + Travel Guitar)


A step by step construction guide will be made available via email on purchase. The pdf is available here for download. The step by step guide includes instructions on how to wire appropriate power supply for listed Graphtech (9v) , RMC (9v) and Roland (+7v & -7v) pick-up systems.



How to wire a 13 Pin DIN:

Other useful resources:

DSP Abstractions


A series of DSP abstractions created in the open-source object orientated programming environment, Pure Data, will be made available shortly. Multiple instances of each abstraction may be (re)called to attend to the audio of each string. It is suggested that each user downloads Pure Data Extended. Excellent Pd tutorials can be found here, here, and here.

Disclaimer (July 2011)

The user must have a competent level of electrical engineering skill in order to attempt the following DIY project (you must have some soldering experience). The following DIY kit has been tested thoroughly with Graphtech’s Modular Hexpander, RMC, and Roland’s GK-3 pick-up systems only. Please ensure that the relevant pick-up system is compatible with the available kit before use, and that you follow our step by step construction guide carefully and correctly. We recommend the use of a voltage meter to ensure the voltage polarity is correct before attaching the relevant pick-up system. The breakout box should always be connected to a guitar with an appropriate pickup system, and never to any other equipment. We are not responsible for any damage caused.


Please also note the following:

I would encourage all users to contact me directly if you have any issues with the kits, given that this is a personal project.

This is a very small operation, which serves the purpose of academic research. There is no money behind it. All design, parts and postage are covered by the time and money of the two individuals involved (myself and an engineer). The kits are sold as a beta project, not as a polished professional corporate product (although perhaps it may result in a more professional product, which is heavily dependent upon the feedback we receive at this stage of the research).

In terms of pricing, we can assure you that we have made the kit as affordable as possible. We have to take into consideration the time spent on the construction of each circuit board. If you believe you are able to source parts at a cheaper price in your home country or elsewhere, you are welcome to source the parts by yourself and we may then arrange to send the parts which you require at a discounted price.

Professional packaging is currently unaffordable, hence the reuse of existing packaging from parts. I do apologise if the packaging condition does not meet your expectations. Please bare in mind the kits are coming from the U.K. The largest concern is that all parts and components should reach you safely and in good condition. If this has not been the case, you should contact me immediately.

Please also note it does not list anywhere on this website that paper instructions will be provided. This was not advertised at any point. Instructions are made available for download and are sent via email to each individual who purchases a kit. So, please, for whatever reason, do not expect paper instructions.

3 thoughts on “Septar Board Kit (Limited Beta Edition) – Now Available”

  1. Can you tell me what the name of that patch of pure data that you used in the DSP Abstraction video?? I’m installing Pure DAta and it’s very interesting, I’m using Ableton Live and Max too, and I think that you follow a way very similar to me.

  2. I built the patch. I will release all the abstractions sometime later this year. If you have any more questions, please ask.

Leave a Reply

Your email address will not be published.